Compare Wishlist

Flow filter Oase BioTec ScreenMatic 40000

59,946.04 грн.
rating
  • Brand: Oase
  • Product Code:57694
  • Артикул: 57694
  • Availability:In Stock

Oase BioTec ScreenMatic 40000 is a flow filter that effectively purifies pond water from mechanical and chemical contaminants.The main functions of this kit are mechanical and biological filtration:Mechanical filtration is carried out through filter ..

Oase BioTec ScreenMatic 40000 is a flow filter that effectively purifies pond water from mechanical and chemical contaminants.

The main functions of this kit are mechanical and biological filtration:

Mechanical filtration is carried out through filter materials that trap large contaminants such as branches, leaves and other mechanical impurities.

Biological filtration is based on the work of bacteria that decompose organic matter and turn them into biologically stable compounds. This helps reduce ammonia and nitrite levels, which are harmful to fish and other organisms in the pond.

It is possible to connect the Oase Bitron ultraviolet sterilizer.

The filter is installed above the water level, does not take much time for maintenance. The filter has a bottom drain and handles for easy cleaning.

The filter has a pollution sensor, with which you can see when you need to clean full.

Installation:

The BioTec ScreenMatic 40000 flow filter is installed only above the water level. Water enters the filter using a pump, then flows by gravity back into the pond.

Equipment:

Total number of filter sponges: 8

Number of blue sponges: 2

Number of red sponges: 3

Number of purple sponges: 3

Special filter granules (kg): 2.5

Characteristics:

Connection, inlet: 1", 1 ¼", 1 ½"

Connection, outlet: DN 75

Connection, drain: DN 50

Pump capacity min (l/h): 4000

Pump capacity max (l/h): 9000

For ponds with max. volume (m³): 40

For fish ponds volume (m³) : 20

For koi ponds volume (m³): 10

Main
Installation type: On the land
Manufacturer: Oase
Країна виробник: Germany
Warranty: 2 years
Technical
For ponds with fish: 20000 л
Номінальна напруга: 230 В / 50 Гц, 12 В
For ponds max. before : 40000 л
Inlet fittings: DN 75
Mud drains: DN 50
Dimensions
Size (L*W*H) : 788 x 590 x 445 мм
Weight: 20 кг
Write a review
Note: HTML is not translated!
    Bad           Good
New arrivals

Ornamental crucian carp Hoe Kim 7–9 cm

rating
200.00 грн.

Ornamental crucian carp Hoe Kim is a bright stavkova fish with a distinctive red-white or red-colored barred tail and a characteristic wide tricut tail. Due to the rich color and active behavior of the fish, the fish looks very effective in a decorat..

Polygomma Primer (3.7L gallon)

rating
5,600.00 грн.

A specialized primer for preparing EPDM and butyl rubber membranes before bonding seams with seam tapes.Polygomma Primer is a primer for EPDM and butyl rubber membranes.Polygomma Primer is a specialized primer designed to prepare the surface of EPDM ..

rating
1,860.00 грн.

Special primer for the preparation of EPDM and butyl rubber membranes before gluing seams with seam stitches.Polygomma Primer - primer for EPDM and butyl rubber membranesPolygomma Primer is a specialized primer used for preparing the surface of EPDM ..

Self-adhesive tape Polygomma 7.62 cm x 30 m (cut)

rating
10,550.39 грн.

Polygomma Self-Adhesive Tape for Bonding Butaco Rubber, 7.62 cm x 30 mPolygomma self-adhesive tape is designed for bonding butaco rubber membranes and films. It is used to join sheets of material into a single, sealed web during the installation of w..

Self-adhesive tape Polygomma 7.62 cm x 30 m (cut)

rating
390.00 грн.

Polygomma Self-Adhesive Tape for Bonding Butaco Rubber, 7.62 cm x 30 mPolygomma self-adhesive tape is designed for bonding butaco rubber membranes and films. It is used to join sheets of material into a single, sealed web during the installation of w..

Butyl rubber EPDM membrane Polygomma 1 mm, width - 15.25 m, price per 1 m2

rating
739.00 грн.

Polygomma 1mm EPDM Bottle Rubber MembraneThe 1mm Polygomma EPDM bottle rubber membrane is a reliable waterproofing material made of synthetic rubber (EPDM), designed for the construction and protection of ponds, reservoirs, and technical tanks for va..

Butyl rubber EPDM membrane Polygomma 1 mm, width - 12.20 m, price per 1 m2

rating
739.00 грн.

Polygomma 1mm EPDM Bottle Rubber MembraneThe 1mm Polygomma EPDM bottle rubber membrane is a reliable waterproofing material made of synthetic rubber (EPDM), designed for the construction and protection of ponds, reservoirs, and technical tanks for va..

Butyl rubber EPDM film Polygomma 1 mm, width - 9.15 m, price per 1 m2

rating
739.00 грн.

The Polygomma 1 mm EPDM butyl rubber membrane, 9.15 m wide, is a universal waterproofing membrane made of synthetic rubber (EPDM) designed for ponds, various reservoirs, water storage tanks, as well as for use in agriculture, fire protection systems,..

;