Compare Wishlist

Hiblow HP-60 - membrane type air compressor for pond

11,475.03 грн.
rating
  • Brand: Hiblow
  • Product Code:HP-60
  • Артикул: HP-60
  • Availability:In Stock

One of the most essential components in any body of water is oxygen. For the normal functioning of the reservoir, the water in it must be saturated with oxygen, so your pond will be clean and transparent. To saturate water, air compressors (aerators)..

One of the most essential components in any body of water is oxygen. For the normal functioning of the reservoir, the water in it must be saturated with oxygen, so your pond will be clean and transparent. To saturate water, air compressors (aerators) or, as they are also called, air pumps have long been developed. The choice of a reservoir compressor must be taken very seriously, since such equipment is often expensive, both when purchased and maintained, and the compressor must operate 24 hours a day. This means that an expensive and high-quality compressor as a whole will be cheaper than the cheapest or home-made compressor, which will break after a month of intensive use.

Compressors of the Hiblow trademark made in Japan have long occupied a deserved place in the list of some of the most reliable and high-quality. The company has been manufacturing its equipment for over 40 years and has long been tested by time. Hiblow compressors have implemented a technical solution when the rubber membrane is driven by a magnetic piston moving under the influence of an alternating magnetic field. Thus, it was possible to simplify the design of the air pump, reduce the number of components, as a result of which it was possible to achieve excellent indicators of reliability.

Hiblow air compressors are not only used for aeration of decorative ponds, they are also designed for use in water supply systems, for aeration of treatment facilities and for oxygen enrichment of fish ponds, as well as for transportation of live fish.
Main
Manufacturer: Hiblow
Warranty period: 12 month
Країна виробник: Japan
Technical
Noise level: 38 dB
Pressure: 0,014 Мра
Номінальна напруга: 230 V / 50 Hz
Продуктивність: 3 600 l/hour
Споживана потужність: 51 W
Тип компресора: Membrane
Dimensions
Size (L*W*H) : 235*180*196 mm
Weight: 7 kg
Write a review
Note: HTML is not translated!
    Bad           Good
New arrivals

Ornamental crucian carp Hoe Kim 7–9 cm

rating
200.00 грн.

Ornamental crucian carp Hoe Kim is a bright stavkova fish with a distinctive red-white or red-colored barred tail and a characteristic wide tricut tail. Due to the rich color and active behavior of the fish, the fish looks very effective in a decorat..

Polygomma Primer (3.7L gallon)

rating
5,600.00 грн.

A specialized primer for preparing EPDM and butyl rubber membranes before bonding seams with seam tapes.Polygomma Primer is a primer for EPDM and butyl rubber membranes.Polygomma Primer is a specialized primer designed to prepare the surface of EPDM ..

rating
1,860.00 грн.

Special primer for the preparation of EPDM and butyl rubber membranes before gluing seams with seam stitches.Polygomma Primer - primer for EPDM and butyl rubber membranesPolygomma Primer is a specialized primer used for preparing the surface of EPDM ..

Self-adhesive tape Polygomma 7.62 cm x 30 m (cut)

rating
10,550.39 грн.

Polygomma Self-Adhesive Tape for Bonding Butaco Rubber, 7.62 cm x 30 mPolygomma self-adhesive tape is designed for bonding butaco rubber membranes and films. It is used to join sheets of material into a single, sealed web during the installation of w..

Self-adhesive tape Polygomma 7.62 cm x 30 m (cut)

rating
390.00 грн.

Polygomma Self-Adhesive Tape for Bonding Butaco Rubber, 7.62 cm x 30 mPolygomma self-adhesive tape is designed for bonding butaco rubber membranes and films. It is used to join sheets of material into a single, sealed web during the installation of w..

Butyl rubber EPDM membrane Polygomma 1 mm, width - 15.25 m, price per 1 m2

rating
739.00 грн.

Polygomma 1mm EPDM Bottle Rubber MembraneThe 1mm Polygomma EPDM bottle rubber membrane is a reliable waterproofing material made of synthetic rubber (EPDM), designed for the construction and protection of ponds, reservoirs, and technical tanks for va..

Butyl rubber EPDM membrane Polygomma 1 mm, width - 12.20 m, price per 1 m2

rating
739.00 грн.

Polygomma 1mm EPDM Bottle Rubber MembraneThe 1mm Polygomma EPDM bottle rubber membrane is a reliable waterproofing material made of synthetic rubber (EPDM), designed for the construction and protection of ponds, reservoirs, and technical tanks for va..

Butyl rubber EPDM film Polygomma 1 mm, width - 9.15 m, price per 1 m2

rating
739.00 грн.

The Polygomma 1 mm EPDM butyl rubber membrane, 9.15 m wide, is a universal waterproofing membrane made of synthetic rubber (EPDM) designed for ponds, various reservoirs, water storage tanks, as well as for use in agriculture, fire protection systems,..

;