Compare Wishlist

AquaKing RVS2 JUVC-40 T-5 - ultraviolet sterilizer for pond.

10,302.02 грн.
rating
  • Brand: AquaKing
  • Product Code:RVS2 JUVC-40 T-5
  • Артикул: 16075
  • Availability:In Stock

AquaKing ultra-violet sterilizer for the new RVS2 JUVC series with the original 40W bulb, which has a longer life span and an easy replacement method. The housing of this sterilizer is made of stainless steel and polished from the inside. UV rays ref..

AquaKing ultra-violet sterilizer for the new RVS2 JUVC series with the original 40W bulb, which has a longer life span and an easy replacement method. The housing of this sterilizer is made of stainless steel and polished from the inside. UV rays reflect off the polished surface, increasing lamp efficiency by 35%. Such a sterilizer is designed for reservoirs up to 40 m in volume and pumps with a capacity of up to 20 000 liters per hour. By installing such a device, you will save many fish in the pond from many diseases and be able to maintain perfect water purity.

For prolonged operation of the sterilizer, maintenance must be carried out at least three times a year. To do this, first switch off the power to the unit and then turn off the power to the pump. Then carefully remove the quartz tube and clean it with warm soapy water. Scum and other hard deposits can be removed with vinegar. Rinse and clean sterilizer housing and water inlets and outlets. After performing these procedures, you can assemble the device and turn it on. It is recommended that you change the lamp at the beginning of each season to make the device more efficient, even though its life span is approximately 9000 hours.

Warning! The sterilizer can only be started after the pump is switched on and there is a constant flow of water.

Warning! There is no warranty on UV lamps!
Main
Warranty period: 24 month
Країна виробник: Netherlands
Technical
Working pressure: 3 Bar
Вихідні з’єднання: 1", 1 1/4", 1 1/2"
Вхідні з’єднання: 1", 1 1/4", 1 1/2"
Довжина кабелю живлення: 5 m
Потужність УФ-лампи: 40 W
Продуктивність: 20 000 l/hour
Dimensions
Size (L*W*H) : 936*544*144 mm
Description
Матеріал корпусу: Stainless Steel
Об'єм водойми без риби: 40 000 l
Об'єм водойми з рибою: 20 000 l
Write a review
Note: HTML is not translated!
    Bad           Good
New arrivals

Ornamental crucian carp Hoe Kim 7–9 cm

rating
200.00 грн.

Ornamental crucian carp Hoe Kim is a bright stavkova fish with a distinctive red-white or red-colored barred tail and a characteristic wide tricut tail. Due to the rich color and active behavior of the fish, the fish looks very effective in a decorat..

Polygomma Primer (3.7L gallon)

rating
5,600.00 грн.

A specialized primer for preparing EPDM and butyl rubber membranes before bonding seams with seam tapes.Polygomma Primer is a primer for EPDM and butyl rubber membranes.Polygomma Primer is a specialized primer designed to prepare the surface of EPDM ..

rating
1,860.00 грн.

Special primer for the preparation of EPDM and butyl rubber membranes before gluing seams with seam stitches.Polygomma Primer - primer for EPDM and butyl rubber membranesPolygomma Primer is a specialized primer used for preparing the surface of EPDM ..

Self-adhesive tape Polygomma 7.62 cm x 30 m (cut)

rating
10,550.39 грн.

Polygomma Self-Adhesive Tape for Bonding Butaco Rubber, 7.62 cm x 30 mPolygomma self-adhesive tape is designed for bonding butaco rubber membranes and films. It is used to join sheets of material into a single, sealed web during the installation of w..

Self-adhesive tape Polygomma 7.62 cm x 30 m (cut)

rating
390.00 грн.

Polygomma Self-Adhesive Tape for Bonding Butaco Rubber, 7.62 cm x 30 mPolygomma self-adhesive tape is designed for bonding butaco rubber membranes and films. It is used to join sheets of material into a single, sealed web during the installation of w..

Butyl rubber EPDM membrane Polygomma 1 mm, width - 15.25 m, price per 1 m2

rating
739.00 грн.

Polygomma 1mm EPDM Bottle Rubber MembraneThe 1mm Polygomma EPDM bottle rubber membrane is a reliable waterproofing material made of synthetic rubber (EPDM), designed for the construction and protection of ponds, reservoirs, and technical tanks for va..

Butyl rubber EPDM membrane Polygomma 1 mm, width - 12.20 m, price per 1 m2

rating
739.00 грн.

Polygomma 1mm EPDM Bottle Rubber MembraneThe 1mm Polygomma EPDM bottle rubber membrane is a reliable waterproofing material made of synthetic rubber (EPDM), designed for the construction and protection of ponds, reservoirs, and technical tanks for va..

Butyl rubber EPDM film Polygomma 1 mm, width - 9.15 m, price per 1 m2

rating
739.00 грн.

The Polygomma 1 mm EPDM butyl rubber membrane, 9.15 m wide, is a universal waterproofing membrane made of synthetic rubber (EPDM) designed for ponds, various reservoirs, water storage tanks, as well as for use in agriculture, fire protection systems,..

;